FREE WORLDWIDE SHIPPING!

Fly Casting – 5 Types You Should Know


 

The art of fly casting is a very important skill in fly fishing. It requires gradual, synchronized movements. It helps to think of each movement, both the back cast and the forward cast, as divided into three steps. The first is loading, the second is the momentum of projection, and the third is the pause. It takes a lot of practice to master the art of fly casting.

 

Let's dive right in.

 

The Art of Fly Casting

 

There are several types of casts. The most common of these include the basic cast, false cast, side and reverse casts, roll cast, and double haul cast.

 

Basic Cast

 

In fly casting the easiest cast, called the basic cast, is simply casting the line straight back and then directly forward. Anyone new to fly fishing should master the basic cast before going on to other techniques.

 

Use a short length of line to begin with if you are new to fly casting. This will help you gain sufficient control of the line, while practicing short gentle movements.

 

Fly Casting with the False Cast

 

The false cast is a variation of the basic cast. It consists of the same backward and forward movements as the basic cast, and is immediately followed by another set of the same movements.

 

The fly line actually travels backward and forward repeatedly without touching the water. Practicing this type of cast helps to build the precise timing that is required in fly fishing.

 

Side and Reverse Casts

 

In fly fishing the side and reverse casts are generally used when wind is a problem. They are also used if there are obstacles that can make a regular cast difficult.

 

Fly Casting using the Roll Cast

 

A roll cast is generally used if the fisherman finds themselves with their back to such obstacles as a high riverbank or a wall of vegetation. When these conditions exist, a basic cast is almost impossible.

 

You need to let out a good length of line in front of you; it's best to let the current take it a short distance. The drag of the water on the line will load the rod, and you can cast forward without needing to execute the back cast.

 

Double Haul Cast

 

Using a double haul cast in fly casting will enable you to cast a much longer line than is possible with a basic cast. In order to do this you need to have a much faster line speed.

 

This is done by making much larger casting movements, applying more strength, and loading the rod more before the forward cast. During this cast both hands of the fisherman must work independently.

 

Used Most

 

The above five types of fly fishing casts are the ones used most often in fly fishing. There are many other types of casts also, including the S-cast, the parachute cast, and the mend cast.

 

Fly casting is the basic physical skill involved in fly fishing. Its purpose is to place the fly exactly where you want it to be, just like any other skill it takes practice.

 

Presentation

 

Accuracy and the delicacy of the presentation are very important when fly casting. Mastering the basics of fly casting first will make it easier to move on to the more difficult casts.

 

Now I'd like to hear from you.

 

If you found this post on Fly Casting informative please share it on social media through the buttons on this page and/or leave a comment below. Thank You For Reading!

 

For more information and cool fishing products check us out! 

Liquid error (sections/article-template line 33): Could not find asset snippets/social-sharing.liquid

Leave a comment


Please note, comments must be approved before they are published